Audi Recalls 19,000 e-tron EVs Over Brake Fault That Could Limit Stopping Power
Audi has recalled almost 19,000 examples of its e-tron and e-tron Sportback electric SUVs in the United States for a braking system problem. Due to a manufacturing flaw, the brake pedal may detach from the brake booster, which can lead to a loss of braking capability in a worst-case scenario. The safety risk is self-explanatory, as even a minor loss of braking functionality can dramatically increase the risk of a crash. Here's everything you need to know about this recall.
Related: 12.1 Million Recalls Later, America's Auto Industry Has a Serious Problem
Audi e-tron Braking Recall
The recall affects 18,853 Audi e-tron and e-tron Sportback models. For the e-tron, 2019 to 2024 model years are impacted, while certain Sportbacks between the 2020 and 2024 model years are affected, too. Audi rebranded the e-tron SUV as the Q8 e-tron from the 2024 model year onwards, which means that certain Q8 e-trons will also be affected.
So, what exactly is wrong with these Audis? According to documentation on the National Highway Traffic Safety Administration's website, the fastener connecting the brake pedal and brake booster may have been incorrectly assembled. This can lead to the brake pedal detaching from the brake booster. Perhaps the most concerning statement in the recall report is this: "If a complete separation occurs, vehicle braking would only be possible using the emergency braking function, increasing the risk of a crash."
Relying on emergency braking alone is a scary thought, which is why this recall should not be taken lightly. Thankfully, as of April 9, 2026, Audi says it's unaware of any injuries, claims, or crashes involving this brake flaw.
What Owners Should Do Now
Audi intends to mail notification letters to owners of affected e-tron models by June 12, 2026. If you would like more information before then, you can contact Audi's customer service center on 1-800-253-2834, using the recall number 46P7. Alternatively, you can use your Vehicle Identification Number (VIN) to check if your specific vehicle is part of the recall group. This can be done on the NHTSA website.
If your vehicle is affected, a dealer will inspect the pushrod screw joint in the brake booster. If required, it will be torqued to the correct specifications, and Audi will be offering a reimbursement plan for this job.
This recall is an expansion of another recall (24V621) issued for the same problem in August 2024. At that time, only 206 examples of the 2019 e-tron SUV were recalled. Audi has clearly determined that more models than expected have the same problem.
Related: Audi Recalls Over 356,000 Vehicles Across 19 Models
Copyright 2026 The Arena Group, Inc. All Rights Reserved.
This story was originally published April 24, 2026 at 4:00 AM.