Chemical Safety Board outlines Nippon investigation focus
The lead investigator at the federal agency looking into the cause of the catastrophic tank collapse at Nippon Dynawave has outlined four priorities as they gather information.
Quality journalism doesn't happen without your help
Support local news coverage and the people who report it by subscribing to The Daily News.
The area where the U.S. Chemical Safety and Hazard Investigation Board is focusing their investigation to answer why the tank failed are:
* "Mechanisms that led to tank failure,"
* "Facility siting,"
* the tank's "maintenance and mechanical integrity" and,
* "relevant facility, corporate and industry standards."
The brief Thursday presentation did not unpack those investigative priorities beyond stating that "our investigation is ongoing."
Mark Wingard, the supervisory chemical incident investigator with the board, provided this first official progress report about the Longview investigation at the federal agency's quarterly public meeting held online.
The U.S. Chemical Safety and Hazard Investigation Board's investigation into the Longview industrial incident that killed 11 workers, however, is still very early into the process.
The agency was deployed to the Longview paper packaging plant on Industrial Way the day the tank collapsed on May 26, and Wingard said at the meeting that the board's investigators are still on scene gathering facts and information.
"We're currently looking into a variety of different areas," Wingard said.
The Washington State Department of Labor & Industries is separately investigating the incident. The state investigation will focus more into whether any regulations were not followed, and by state law it must be completed within 180 days of starting it.
The CSB investigation - and the incident reports that are routinely larger than 100 pages - could take years to complete. The nonpartisan federal agency does not impose penalties, but instead is focused on discovering the root cause to help other industrial plants avoid similar tragedies.
Nippon Dynawave Packinging Company sign
The Nippon Dynawave sign between the main gate and the visitor center located at 3401 Industrial Way, on Thursday Nov. 28, 2024, in Longview.
Kraft papermaking process outlined
Wingard discussed how the white liquor tank was used at the pulp paper mill leading up to its collapse on May 26. Using a simplified flow chart, he explained that the kraft papermaking process requires very large storage tanks to hold the necessary "liquors" or chemical agents used at different stages.
"The liquor goes into a loop," Wingard said, explaining how liquors are reused. The involved white liquor tank was "immediately upstream" from the "digestor" stage, where the superheated and highly caustic white liquor would be mixed with wood chips to be made into pulp.
From there, in simplified terms, the spent liquor gets separated from the pulp and is known as weak black liquor. An evaporator turns it into strong black liquor, a "boiler" stage creates green liquor and a "recausticizer" process converts it back into white liquor.
The board's presentation put the time that the tank failed at 7:08 a.m. May 26. The tank failure created a "wave of caustic liquid that knocked down walls and filled a large portion of the facility. It also reached the Columbia River as well as the ditch system.
Eleven people ultimately died and three people were seriously injured in the incident. The injury number is below the tally of eight people injured originally provided by the multi-agency Joint Information Center, which includes the Washington State Department of Ecology and the U.S. Environmental Protection Agency.
Board Chairperson Stephen Owens clarified later in the meeting that the federal agency has a more rigid definition for "serious" injuries. For instance, the agency follows a formal guideline for hospital admissions in order to be counted.
Copyright 2026 Tribune Content Agency. All Rights Reserved.